AFERIY P010 Portable Power Station 800W 512Wh

Regarding the capacity of the power station, the P010 has a nominal capacity of 512Wh. In practice, the output capacity is generally lower than the nominal capacity due to the following reasons:

• Battery Life Protection: The battery never discharges completely (even when the power station indicates 0%, about 5% of the energy remains in the battery pack) to extend the life of the power station.
• Self-Consumption: When the AC switch on the power station is turned on, the device consumes about 20-25W per hour. Therefore, the longer the device is used, the higher the self-consumption of the power station.
• Conversion Losses: The battery pack of the power station converts DC to AC via an inverter, with a conversion efficiency of around 90%. Additionally, there are energy losses through various circuits.

These factors result in an actual output capacity that is lower than the nominal capacity.

Yes, please note that you need to activate the corresponding output switch on the portable power station.

When the portable power station is connected between a wall AC outlet and appliances, and both the power and AC switch of the portable power station are in the ON position, the product switches to UPS mode (Uninterruptible Power Supply).

The cooling fan does not run continuously; it only starts automatically when the internal temperature of the power station exceeds 60 degrees Celsius.

It is quiet during normal operation, and when the cooling fan is active, the noise is less than 60 dB.

Yes, the AFERIY portable power station can be permanently connected to a solar panel. However, during sunrise or sunset, the solar panel might emit a ticking sound (due to an internal relay in the AFERIY portable power station, which serves as a protective circuit). This sound is normal and will not damage the power station or the solar panel. Additionally, please note that the portable power bank will experience slight energy consumption when connected to a solar panel without any power input.

Therefore, it is recommended to connect the solar panel only during the day and disconnect it when there is no charging effect at night.

Yes, the AFERIY AF-P010 is compatible with most other brands of solar panels on the market. It is also compatible with AFERIY solar panels: AF-S200, AF-S100. Please note that the AFERIY AF-P010 supports a maximum input voltage of 50V, a maximum input power of 200W, and a maximum input current of 8A.

This depends on the combined power, voltage, and current of the solar panels you choose. You can connect the solar panels in parallel or series. Note that the AFERIY AF-P010 supports a maximum input voltage of 50V, a maximum input power of 200W, and a maximum input current of 8A. If you connect AFERIY solar panels, you can connect either one AF-S100 (100W*1) or one AF-S200A1 (200W*1), or you can connect two AF-S100 solar panels (100W*2) simultaneously for charging.

Yes, you will need a single car charging cable (XT60 connector). Note that the car charging cable should be able to handle a current greater than 10A.

No. If the internal battery is malfunctioning, please contact AFERIY customer service.

No. If the internal battery is malfunctioning, please contact AFERIY customer service.

If the battery needs to remain unused for an extended period (more than 3 months), it should be kept at 60-80% of its nominal capacity (it is recommended to check and charge it every 3 months). Store it in a dry, cool place, avoid contact with corrosive substances, and keep it away from fire and heat sources.

Many motors or compressors generate an inrush current that is much higher than their rated operating power during startup. This starting current requirement can be several times the rated power, usually between 2 and 7 times higher. This may exceed the power station's supply capacity, preventing the device from starting. For example, equipment such as water pumps, air conditioner compressors, and refrigerator compressors.

AC output voltage and frequency standards vary by country. Please check the voltage or frequency requirements before use.

Procedure: Briefly press the AC switch.

Change Frequency: Hold the button for 3 seconds to enter frequency change mode. 50Hz and 60Hz will blink on the screen. Press the button again to select the correct frequency. When the frequency stops blinking, the desired frequency is selected.

Change Voltage: Press the button quickly 10 times to switch the voltage.